LCP Silicone thermal pad with one side silicone tape
Item No.: 150R-P15
LCP Silicone thermal pad with one side silicone tape
Description
LCP is a value of the thermal interface material. The material is made on the base of coating thermally conductive polymer on fiberglass silicone tape
coated substrate for easy to process and assembly. The softness and high adhesive can be used in filling the air gap between the PC board and the
radiator or metal case.And its high adhesive is suitable for low stress shock absorption. Single-sided stickiness and puncture resistance is an electrical
insulation material for the use of filling cooling insulation for activities or with the needle irregular heaters.Also it can also be used for thermal
conductive between high-voltage bare wire devices and heat sink.
Features & benefits:
● Only one side is sticky
● Enhanced anti-puncture, shear and tear resistance
● High fit, low-hardness gap filling material
● Strong electrical insulation
Typical applications:
●Power supply module
● car battery pack
● Power conversion equipment
● Car equipment / charger
● Where heat is to be transmitted to a rack, chassis, or other heat sink
Physical properties:
Configurations available: 200mm*400mm, 300mm*400mm;customized size available.
coated substrate for easy to process and assembly. The softness and high adhesive can be used in filling the air gap between the PC board and the
radiator or metal case.And its high adhesive is suitable for low stress shock absorption. Single-sided stickiness and puncture resistance is an electrical
insulation material for the use of filling cooling insulation for activities or with the needle irregular heaters.Also it can also be used for thermal
conductive between high-voltage bare wire devices and heat sink.
Features & benefits:
● Only one side is sticky
● Enhanced anti-puncture, shear and tear resistance
● High fit, low-hardness gap filling material
● Strong electrical insulation
Typical applications:
●Power supply module
● car battery pack
● Power conversion equipment
● Car equipment / charger
● Where heat is to be transmitted to a rack, chassis, or other heat sink
Physical properties:
Test item | Test method | Unit | LCP100 Test Value | LCP150 Test value |
Color | White/Pink | White/Pink | ||
Thickness | ASTM D374 | Mm | 0.5~10.0 | 0.5~10.0 |
Specific Gravity | ASTM D792 | g/cm3 | 1.8 | 2.8 |
Hardness | ASTM D2240 | Shore C | 10±5~30±5 | 10±5~30±5 |
Continuous use Temp |
EN344 | ℃ | -40~200 | -40~200 |
Voltage Endurance |
ASTM D149 | KV/mm | >5.0 | >5.0 |
Flame Rating |
UL-94 | V-0 | V-0 | |
Conductivity | ASTM D5470 | w/m-k | 1.0 | 1.5 |
Relevant
Relevant
Review